How much does it cost for refrigerator repair services?

refrigerator repair

A refrigerator is an indispensable part of almost all households. When well maintained, this appliance can last for a decade and a half. People start thinking about refrigerator repair services only when the food begins to go stale. There are several giveaway signs that indicate the need for tending to your appliance. Refrigerator repair services cost can range anywhere between $50 and $500 depending on what the problem is and which component is at fault. There are several refrigerator repair services available in Texas and “Irving Refrigerator Repair” is a reliable company. If you are looking for an answer to the question – how much does refrigerator repair cost, you have to narrow down on the problem to see which component has to be replaced. Read on to find out.

Problem 1: Too much noise

This is the most common problem that people encounter with their refrigerators. It could be because of a faulty evaporator or condenser fan motor, fan blade or compressor. If the problem is with the fan motor, the noise will be more when you open the freezer or refrigerator door. This is likely to be the problem if the ice formation takes longer than usual or the food remains warm. The cost of repairing a compressor is around $50 and may go up to $300 depending on the brand and size of the refrigerator while motor repair costs between $200 and $250.

Refrigerator owners must check if the fan blades are loose and/or the motor shaft turns freely. The evaporator and condenser motors are present inside the freezer and refrigerator respectively. If it is not possible to identify the reason or the appropriate motor has to be replaced, then the assistance of appliance repair personnel may be required.

Problem 2: Water leak

This may be because of a blocked defrost drain. This is located at the back panel of the freezer and can be blocked due to frost and/or debris. The best way to remove the frost is to disconnect the electricity for a while and allow the ice to thaw. Once this is done, owners can flush hot water down the drain to remove the debris. Alternatively, they can trace the drain hose and remove the rubber valve at the end that traps the debris. The valve can be washed with soap and hot water. After drying it, the rubber valve can be put back into the original position.

The other reason for a water leak is a faulty water supply line that hinders the working of the water dispenser and icemaker. To fix this, owners must cut off the power supply from the fridge and locate the shutoff valve. They must ensure that the valve is closed and there is no damage to the plastic supply line. If it is broken or damaged, then it is time to call a refrigerator repair person from Irving Refrigerator Repair to help with a replacement.

Problem 3: Fridge/freezer too warm

It can be alarming when the food inside the refrigerator remains warm for a long time. This may be because of a problem with one or more parts. The parts affected are usually the damper control assembly, evaporator fan motor and/or coils, thermistor, defrost thermostat, defrost timer, main control board, defrost control board and temperature control board. If the fan is running, then the problem may be just due to the dust accumulation on the coils preventing the air circulation. Cleaning the coils will solve the problem. In case the problem is with the thermostat, the repair will take an hour and cost between $50 and $250.

However, it may be challenging to find the exact faulty component immediately. In such cases, it will require the expertise of an appliance repair personnel to fix the problem. If the part cannot be repaired for reasons like a broken component, he/she will help you with a replacement.

Problem 4: Ice not getting formed

This is, without a doubt, a problem associated with the freezer. One of the first things that can be checked is if there is a blockage in the tube located behind the icemaker and preventing water flow into the fill cup. The inlet valve must also be inspected for normal water pressure and blocks. The cost of repairing the ice maker assembly is often close to $330. In some cases, it may even be as low as $175.

If the freezer temperature continues to be about 15F while the water pressure is normal, the inlet valve has enough power and all other parts are functioning properly, he or she can seek assistance to help with the icemaker assembly replacement.

Bottomline

The above price quotes are just average values for repairing different components of a refrigerator that could become faulty. To know the exact cost, consider calling up the Irving Refrigerator Repair company in Texas to know the actual costs. Brand-specific appliance repair companies like Irving Refrigerator Repair company tend to be a tad expensive but they offer assurance of using genuine parts in case a replacement must be done.

Continue reading about “Refrigerator repair in Irving

Have Any Query?




    Call Now